2pcs lipo battery 11.1v 1600mah 3s 20c for parrot bebop drone 3.0 rc helicopter quadcopter dron airplane toy parts bateria lipo
2Pcs Lipo Battery 11.1V 1600mAh 3S 20C For Parrot Bebop Drone 3.0 RC Helicopter Quadcopter Dron Airplane Toy Parts Bateria Lipo
-Upgrade battery for Parrot Bebop Drone 3.0 high Capacity .
-Fit for Aircraft Parrot Bebop Drone 3.0 .
-Battery type: Lithium-ion Polymer (20C Continuous Discharge).
-Regular Fly Lasting:13-15 Minutes.
-Battery Cell Class: Imported A class.
-Total Weight: 118g
-Charge Method: Original charger or the third party charger.
-Built-in Protec ICs,Easy and safe for charger and batteries.
2pcs x 11.1V/1600mAH Battery for Parrot Bebop Drone 3.0.
The common sense about battery you should know:
In order to use the lipo battery safely and properly and to learn the common sense on lipo battery,Please read the following words carefully.Hope you will enjoy the flying fun.
1.Using non-lithium battery charger to charge may cause battery damage,smoking,heat or burning.So we suggest to choose special lipo battery balance charger to charge.
2.Overdischarge,overcharger or reverse charging will cause battery damage.
The charging current should not exceed a half of battery capacity.And charge cut-off voltage shoud be 4.2v±0.05V per cell.
Please use the standard balance charger to charge in first use.It should not overdischarge in first use.The single cell (lipo battery is made of several cells of 3.7v battery core,like 11.1v is made of 3 cells of 3.7v battery core,so it is called 3s lipo battery) should not be lower than 3.6v in first use.Continous 5 cycle use will
activate the battery.You can use it continuously.
Please check the battery voltage after activate the battery, three cells of battery total voltage shall be not less than 10.8 V. Two cells of battery total voltage shall be not less than 7.2 V. Single voltage shall be not less than 3.6 V.Or it will lead battery flatulence and damage
Lithium battery self-discharge rate higher than the nickel metal hydride batteries, long-term preservation, easy to excessive discharge, please check the voltage regularly.
The single voltage should between 3.8 V ~ 3.8 V.Preservation conditions: temperature – 20 – 35Celsius degree.The relative humidity of 45% – 85%
6.Polymer lithium battery cell use aluminum-plastic film to pack.And it is prohibited to scrape, crash or prick surface of the battery. Polymer lithium-ion battery has been good welded .Split or rewelding is forbidden. In theory there is no polymer lithium battery electrolyte flowing. In case electrolyte leakage touch skin, eyes or other body parts,should be washed off immediately or go to a doctor. In case of battery heating to soar, please saty far away from the battery to avoid unnecessary hurt
Other tips you should know:
Be sure to use dedicated li-ion battery charger to charge
It is better for not storing in long time in fully charged status. Long time storage easily lead flatulence which will affect the discharge performance.
Best stored voltage is monolithic around 3.8 V,and full charge before use it,which can avoid the battery flatulence
Once battery inflatable please do not use sharp metal pierce to deflated, which will cause the battery internal short circuit in the battery, explosion or burning